What it is
The Dreame A3 AWD Pro 5000 is the 1.20-acre SKU in Dreame Yard Care’s US A3 AWD Pro series. It is a perimeter-wire-free robot mower that maps with OmniSense™ 3.0 — official copy pairs 360° 3D LiDAR with binocular AI vision — and does not use RTK or a boundary wire. Drive is all-wheel drive with hub motors (universal front wheels + off-road rear wheels).
Official US numbers published for this Pro series / SKU: working area capacity 5,000 m² / 1.20 acre on the Pro 5000 variant, max slope 80% (38.7°), mowing width 40 cm / 15.8 in dual-disc, cutting height 3–10 cm (1.2–3.9 in), EdgeMaster™ 2.0 disc-to-edge < 1.2 in / < 3 cm, weight 23.9 kg, noise ≤ 65 dB, waterproofing IPX6, and a 10 Ah battery on the Pro 5000. Obstacle crossing is marketed at 2.2 in (body copy also cites 2.16 in). Dimensions in the spec table: 740 × 532 × 325 mm.
It is not the non-Pro A3 AWD 1000/2000 (7.9 in cut, smaller capacities) and not the Pro 2500 (0.62 acre) or Pro 3500 (0.87 acre).
Who it’s for
Homeowners with up to about 1.20 acre who want a wire-free install that does not depend on an RTK antenna or Network RTK coverage, and who need AWD for slopes inside the published 80% work-area figure. App mapping is remote-control + AI auto-mapping; dual-map and multi-zone management are listed. Skip it if the lawn needs more than 1.20 acre of rated capacity, if you specifically want RTK/Network RTK, or if a smaller Pro 2500/3500 or non-Pro A3 AWD is enough.
Standout details
- Coverage: Variant title and spec table — A3 AWD Pro 5000 = 5,000 m² / 1.20 acre. Sibling Pro variants on the same PDP: 2500 = 0.62 acre; 3500 = 0.87 acre.
- Navigation: OmniSense™ 3.0; obstacle avoidance listed as 360° 3D LiDAR + binocular AI vision. Marketing states “No RTK. No Wires.” Detection range footnote: up to 230 ft (70 m) under 80% reflectivity conditions.
- Setup: Wire-free. Boundary setup type: remote control + AI auto-mapping. Dual-map supported (separate charging station recommended per map when yards are disconnected).
- Drive and slope: AWD + hub motor; max slope performance 80% (38.7°); marketed obstacle crossing 2.2 in.
- Cutting: 15.8 in (40 cm) dual blades; height 1.2–3.9 in (3–10 cm); EdgeMaster™ 2.0 edge distance < 1.2 in. Modes listed: All-Area / Zone / Edge / Spot / Manual.
- Battery: Pro 5000 = 10 Ah (Pro 2500 = 5 Ah; Pro 3500 = 7.5 Ah); charging current 5 A.
- Connectivity / security: 4G Link service included 3 years free for Pro 2500/3500/5000 (renewal purchase after). Lift-up alerts; AirTag compatibility noted (AirTag sold separately).
- Other verified specs: IPX6 rinseable; noise ≤ 65 dB (standard cutting mode footnote); weight 23.9 kg (52.69 lb); 3-year warranty stated on the US store page.
Sources: Dreame A3 AWD Pro US PDP / cart, Shopify product/cart JSON for variant 48120972181761, checked 20 Sep 2026.
Honest verdict
Buy the Pro 5000 cart if the yard is around or under 1.20 acre, needs AWD toward the 80% slope claim, and you want LiDAR + vision without RTK hardware plus the Pro series’ largest published battery. The official cart on 16 Oct 2026 is $2,999.99 against a $3,499.99 compare-at (it was $3,499.99 with no discount on 20 Sep 2026; not a labeled MSRP). Skip it for larger-than-rated lawns, for RTK-first platforms, or for smaller lots better matched to Pro 2500/3500 or the non-Pro A3 AWD 1000/2000.



